Specifications for Huawei SFP 10G AC7M SFP+, 10G, Active High Speed Direct attach Cable, 7m

Part Number: 02310QPS

Basic Information:

1. Product Name: Huawei SFP 10G AC7M

2. Form Factor: SFP+ (Small Form factor Pluggable Plus)

3. Interface Type: 10 Gigabit Ethernet (10GbE)

4. Cable Length: 7 meters

5. Connector Type: SFP+ (duplex LC)

6. Data Rate: 10 Gbps

7. Transmission Media: Active Copper Cable

8. Operating Temperature: 0°C to 50°C (32°F to 122°F)

9. Storage Temperature:  40°C to 70°C ( 40°F to 158°F)

10. Compliance Standards: IEEE 802.3ae, SFF 8431, SFF 8432

Transmitter Receiver Characteristics:

1. Transmitter:

  Type: 850 nm VCSEL (Vertical Cavity Surface Emitting Laser)

  Output Power: Up to +3 dBm (typical)

  Wavelength: 850 nm

2. Receiver:

  Type: PIN Photodiode

  Sensitivity:  8 dBm to  12 dBm (typical)

  Wavelength: 850 nm

3. Link Length:

  Maximum Length: 7 meters (as specified)

  Supported Distances: 5 m, 10 m (depending on the cable type)

4. Electrical Characteristics:

  Input Voltage: 3.3 V

  Power Consumption: Less than 2.5 W (typical)

5. Performance:

  Bit Error Rate (BER): Better than 10^ 12

  Signal Integrity: Ensured through active electronics within the cable

6. Environmental:

  EMI Compliance: Meets FCC Part 15 Class A, EN55022 Class A, CISPR 22 Class A

7. Safety Approvals:

  CE: Indicates compliance with European safety standards

  FCC: Indicates compliance with Federal Communications Commission regulations

8. Mechanical:

  Operating Humidity: 5% to 90% non condensing

  Storage Humidity: 0% to 90% non condensing

9. Physical Dimensions:

  SFP+ Module: 29.7 mm x 50.1 mm x 13.0 mm

  Cable Diameter: Approximately 8.2 mm

Note: The specifications provided are typical and may vary slightly between different production batches or updates. Always refer to the latest datasheet or product documentation for the most accurate and up to date information.

Bulk Quote & Project Inquiry Contact us

WhatsApp: +86 134 2139 7869

E-mail: ray@mrtlink.com