The Huawei CE8861 4C EI is a high performance, high density 10G SFP+ (Small Form Factor Pluggable Plus) Ethernet module designed for use in Huawei's carrier grade switches and routers. This module is designed to support high speed data transmission and is commonly used in enterprise and service provider networks. Here's a detailed parameter introduction for the Huawei CE8861 4C EI:

1. Model: Huawei CE8861 4C EI

2. Interface Type: 10G SFP+ (Small Form Factor Pluggable Plus)

3. Data Rate: 10 Gbps (Gigabit per second)

4. Wavelength: The module supports various wavelength options depending on the specific model, typically ranging from 850nm to 1310nm for short range applications, and up to 1550nm for longer distances.

5. Transmission Distance: Depending on the wavelength and fiber type, transmission distances can vary from short range (up to 300m) to long haul (up to 80km or more).

6. Duplex: Full duplex capable, allowing simultaneous transmission and reception of data.

7. Auto negotiation: The module supports auto negotiation for data rates, duplex mode, and flow control.

8. Digital Diagnostics Monitoring: Provides real time information about the module's performance, including temperature, voltage, bias current, and optical power levels.

9. Hot swappable: The module is designed to be inserted and removed without rebooting the system, allowing for easy maintenance and upgrades.

10. Compliance: The module is compliant with various industry standards, including IEEE 802.3ae (10GBASE SR/LR/ER/ZR), SFF 8431, and SFF 8432.

11. Operating Temperature: Typically, the module operates within a range of  5°C to +85°C, but this can vary depending on the specific product.

12. Storage Temperature: Usually, the storage temperature range is  40°C to +70°C.

13. Power Consumption: The power consumption of the module can vary but is typically around 2 3 watts.

14. Dimensions: The physical dimensions of the SFP+ module are standardized, with a typical size of about 9.3 mm x 23.2 mm x 54.8 mm.

15. Connector Type: LC (Lucent Connector), which is a common type of fiber optic connector.

This module is designed for use in Huawei's networking equipment and is intended for environments that require high speed data transmission with minimal latency and high reliability. It's important to ensure compatibility with your specific Huawei device before purchasing or using this module.

For more details, You can contact us  Email: info@mrtlink.com

 

Huawei CE5880-48T6Q-EI：